We know from our previous sections that there will be a normal stress from bending that varies along the y-axis. Let's zoom into a small segment of the beam, and analyze the forces acting on it. To understand the nature of this transverse shear stress more mathematically, let's imagine a beam that is simply supported at its ends, and loaded by a point force at its center. This shear stress can cause failure if the horizontal planes that are supposed to resist shearing are weak. This resistance to sliding, or resistance to forces that are parallel to the beam's surface, generates a shear stress within the material. If instead, the planks are glued together, the glue will prevent the beams from sliding past each other. If they are not bound together, applying a load to the free end of the beams will cause them to bend and slide past each other, as shown in the illustration below. Pretend they are 2" by 4" planks of wood. Consider several beams that are cantilevered to a wall. Transverse shear can be a difficult thing to visualize. In this lesson, we will learn how the shear force in beam bending causes a shear stress. This normal stress often dominates the design criteria for beam strength, but as beams become short and thick, a transverse shear stress becomes dominate. In a previous lesson, we have learned about how a bending moment causes a normal stress. As we learned while creating shear and moment diagrams, there is a shear force and a bending moment acting along the length of a beam experiencing a transverse load.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |